This guide intends to teach you OpenLiteSpeed Setup on Ubuntu 24.04 with MariaDB and PHP which means LOMP Stack. The LOMP stack is a set of open-source software used together to run dynamic websites and servers. LOMP stands for:

Linux: The operating systemOpenLiteSpeed: The web serverMySQL/MariaDB: The database management systemPHP: The server-side scripting language

Now proceed to the following steps to start OpenLiteSpeed Setup on Ubuntu 24.04 with MariaDB and PHP.

OpenLiteSpeed Setup on Ubuntu 24.04 – Install LOMP Stack

Before you start OpenLiteSpeed Setup on Ubuntu 24.04, you need to log in to your server as a non-root user with sudo privileges and set up a basic UFW firewall on Ubuntu 24.04. Then, follow the steps below to complete this guide.

Step 1 – Install and Configure OpenLiteSpeed on Ubuntu 24.04

First, you need to run the system update and upgrade with the command below:

sudo apt update && sudo apt upgrade -y

Then, add the OpenLiteSpeed repository to your server with the following command:

sudo wget -O – https://repo.litespeed.sh | sudo bash

Once you are done, run the system update to apply the new repository:

sudo apt update

Now complete your OpenLiteSpeed Setup on Ubuntu 24.04 by using the command below:

sudo apt install openlitespeed -y

Next, your OpenLiteSpeed must be enabled and activated. To verify this, you can run the following command:

sudo systemctl status lsws

In your output, you should see:

At this point, you need to update the firewall rules for OpenLiteSpeed on Ubuntu 24.04. To do this, you must allow the following ports through your UFW firewall:

sudo ufw allow 7080,80,443,8088/tcp

Reload the firewall to apply the changes:

sudo ufw reload

In your terminal, you need to set the OpenLiteSpeed administrator account credentials with the following command:

sudo /usr/local/lsws/admin/misc/admpass.sh

Finally, you can access your OpenLiteSpeed Admin panel by following the URL below:

http://your_server_ip:7080
Or
http://localhost:7080

You will see your OpenLiteSpeed Admin login screen. Enter the credentials you have made and click login to access your admin dashboard.

To get more information, you can visit the official website.

Step 2 – Install MariaDB For OpenLiteSpeed on Ubuntu 24.04

At this point, you can install MariaDB as your database engine. To do this, you can simply run the command below:

sudo apt install mariadb-server -y

Then, run the security script for the initial setup:

sudo mysql_secure_installation

Set a password for your MariaDB and accept the other questions to continue.

Step 3 – Install PHP For OpenLiteSpeed on Ubuntu 24.04

As you may know, the OpenLiteSpeed web server comes bundled with one PHP version. To know which version of PHP was pre-installed with your OpenLiteSpeed server, click the button in the Test PHP section of the example website or visit the following URL:

http://your_server_ip:8088/phpinfo.php
Or
http://localhost:8088/phpinfo.php

As you can see, Ubuntu 24.04 ships with the latest PHP version which is PHP 8.3. From there, you can host a variety of PHP applications and frameworks.

Conclusion

OpenLiteSpeed is designed for high performance and can handle a large number of simultaneous connections, making it ideal for busy websites. At this point, you have learned OpenLiteSpeed Setup on Ubuntu 24.04 with MariaDB and PHP which is LOMP Stack. Hope you enjoy it.

Also, you may like to read the following articles:

How To Install LEMP Stack on Ubuntu 22.04

Install LAMP Stack on Debian 12 Bookworm

LEMP Stack Setup with Docker Compose on Debian / Ubuntu

LAMP Stack Setup on Fedora 39 From Terminal

Are you excited about the upcoming release of PHP 8.4 and What’s New in PHP 8.4? If you’re a developer, you know how important it is to stay updated with the latest versions of programming languages. Let’s see What’s New in PHP 8.4 and its expected release date.

Release Date of PHP 8.4

As you may know, the development process includes multiple phases, including alpha and beta testing, ensuring that the final release is stable and robust. PHP 8.4 is scheduled to launch on November 21, 2024.

What’s New in PHP 8.4 – Major Features

PHP 8.4 will come with exciting new features that will significantly impact how developers write and manage their code. Here are some of the most notable features:

Improved Performance: One of the standout features of PHP 8.4 is its enhanced performance. This version introduces optimizations that boost execution speed and improve memory management.

New Syntax Improvements: PHP 8.4 brings several syntax improvements that make the language more intuitive and easier to use.

Enhanced Error Handling: Error handling in PHP 8.4 has received a significant upgrade. Debugging becomes a breeze with better exception handling and more descriptive error messages.

Security Enhancements: Security is always a top priority, and PHP 8.4 delivers with new security features designed to protect your applications.

Better Compatibility: PHP 8.4 ensures seamless compatibility with existing codebases, minimizing the risk of breaking changes. Additionally, it offers improved support for popular frameworks and libraries, making the transition smoother for developers.

Deprecations and Removals: As with any major release, PHP 8.4 includes the deprecation and removal of certain features.

As we eagerly await its release, it’s essential to start preparing for the upgrade. By staying informed and planning, you can ensure a seamless transition to PHP 8.4 and take full advantage of its capabilities.

Source: PHP 8.4: What’s New and Changed

Note: The current stable version of PHP is PHP 8.3, which you can get more information by visiting PHP 8.3 and New Improvements.

With this step-by-step guide, you will learn PostgreSQL Setup on Ubuntu 24.04. PostgreSQL is a powerful, open-source relational database management system (RDBMS). It’s known for its scalability, and support for advanced data types and performance optimization features.

Why Choose PostgreSQL on Ubuntu 24.04?

Ubuntu 24.04, being a stable and popular Linux distribution, provides an excellent environment for running PostgreSQL. The combination of Ubuntu’s user-friendliness and PostgreSQL’s powerful features ensures a seamless and efficient database management experience.

Prerequisites

Before you begin the PostgreSQL setup on Ubuntu 24.04, you need the following requirements:

A system running Ubuntu 24.04A user account with sudo privilegesAn active internet connection

By following the steps below, you can easily start your PostgreSQL setup on Ubuntu 24.04 and get it up and running on your server. Let’s begin the installation process.

Step 1 – PostgreSQL Setup on Ubuntu 24.04 – Installation Process

First, you must run the system update and upgrade by using the following command:

# sudo apt update
# sudo apt upgrade -y

Then, you must install the postgresql-common package which includes utilities for managing PostgreSQL. To do this, run the following command:

sudo apt install postgresql-common -y

Next, add the PostgreSQL repository to your Ubuntu 24.04 which includes the latest version of PostgreSQL. To do this, run the command below:

sudo /usr/share/postgresql-common/pgdg/apt.postgresql.org.sh

This script will add the PostgreSQL Global Development Group (PGDG) APT repository to Ubuntu 24.04.

Again run the system update with the following command:

sudo apt update

Now use the following command to install PostgreSQL on Ubuntu 24.04:

sudo apt install postgresql -yStep 2 – Start and Enable PostgreSQL Service

After your PostgreSQL setup on Ubuntu 24.04 is completed, you need to start and enable your service with the following commands:

# sudo systemctl start postgresql
# sudo systemctl enable postgresql

Then, verify PostgreSQL service is active and running on Ubuntu 24.04 with the command below:

sudo systemctl status postgresql

In your output, you should see:

Step 3 – Access and Secure PostgreSQL Service on Ubuntu 24.04

PostgreSQL uses the psql command-line interface to interact with the database. By default, PostgreSQL creates a user named postgres. Switch to this user and access the PostgreSQL prompt with the following command:

sudo -i -u postgres psql

In your output, you should see:

Now to secure your PostgreSQL, you can change your postgres user password. To do this, from your PostgreSQL shell, run the following command:

postgres=# password postgres

You will be asked to enter a password. Once you are done, exit from your PostgreSQL shell with the command below:

postgres=# qStep 4 – Configure Remote Access For PostgreSQL Server

By default, PostgreSQL only allows local connections. To enable remote access, you need to modify the PostgreSQL configuration files.

First, you need to open the postgresql.conf file in your preferred text editor like Vi Editor or Nano Editor:

sudo vi /etc/postgresql/16/main/postgresql.conf

Find the line that starts with listen_addresses, uncomment it, and modify it to allow connections from all IP addresses:

listen_addresses=”*”

When you are done, save and close the file.

Next, open the pg_hba.conf file to configure client authentication:

sudo vi /etc/postgresql/16/main/pg_hba.conf

Add the following line at the end of the file to allow remote connections:

host all all 0.0.0.0/0 md5

Once you are done, save and close the file.

Restart the PostgreSQL service to apply the changes:

sudo systemctl restart postgresql

You can verify if PostgreSQL is installed and running correctly by logging in to the PostgreSQL shell with the postgres user:

sudo -i -u postgres psqlStep 5 – Creating a New PostgreSQL Database and User

At this step of PostgreSQL setup on Ubuntu 24.04, you can learn to create a new user and database. From your PostgreSQL shell, you can use the following commands to create a new database and a user with privileges to manage it:

postgres=# CREATE DATABASE mydatabase;
postgres=# CREATE USER myuser WITH ENCRYPTED PASSWORD ‘mypassword’;
postgres=# GRANT ALL PRIVILEGES ON DATABASE mydatabase TO myuser;

To see the list of databases, you can run:

postgres=# l

To exit the PostgreSQL prompt, run the command below:

postgres=# qStep 6 – Backup and Restore PostgreSQL Databases

Regular backups are essential to safeguard your data. PostgreSQL provides tools to perform backups and restore databases.

To backup a database, you can use the pg_dump utility:

pg_dump mydatabase > mydatabase_backup.sql

To restore a database from a backup file, you can use the psql command:

psql mydatabase < mydatabase_backup.sql

That’s it, you are done with the PostgreSQL setup on Ubuntu 24.04. For more information, you can visit the official website.

Conclusion

PostgreSQL Setup on Ubuntu 24.04 is straightforward when you follow these steps. With PostgreSQL’s powerful features and Ubuntu’s stable environment, you’ll have a robust database system ready to handle your applications. Hope you enjoy it. Also, you may like to read the following articles:

OpenLiteSpeed Setup on Ubuntu 24.04 (LOMP Stack)

Change Ubuntu 24.04 Desktop to Cinnamon

Install Grafana on Ubuntu 24.04

Enable ionCube Loader on Ubuntu 24.04

FAQs

How do I check the version of PostgreSQL installed?You can check the installed PostgreSQL version by running psql –version in the terminal.

How can I change the password for a PostgreSQL user?To change a user’s password, log into the PostgreSQL prompt and run: ALTER USER username WITH PASSWORD ‘newpassword’;

How do I create a backup of all databases?Use the pg_dumpall utility to create a backup of all databases: pg_dumpall > all_databases_backup.sql

Can I run PostgreSQL on a different port?Yes, you can change the port by modifying the port parameter in postgresql.conf file and restart the PostgreSQL service.

This guide intends to teach you to Install WineHQ on Ubuntu 24.04. WineHQ, also known as Wine, is a great tool that you can use to run Windows applications on your Linux distribution. With this step-by-step guide, you can easily run Wine on Ubuntu 24.04 and run Windows apps on your server.

Prerequisites

Before you start to install WineHQ on Ubuntu 24.04, you need the following requirements:

By following the steps below, you can easily start your Wine installation on Ubuntu 24.04 and get it up and running on your server. Let’s begin the installation process.

Step 1 – Enabling 32-bit architecture on Ubuntu 24.04

First, you need to run the system update and upgrade with the following command:

sudo apt update && sudo apt upgrade -y

Then, you need to check if 32-bit architecture is installed on your server with the command below:

sudo dpkg –print-foreign-architectures

If nothing is shown in your output, you must enable 32-bit architecture on your server with the command below:

sudo dpkg –add-architecture i386Step 2 – Adding WineHQ Repository To Ubuntu 24.04

To install WineHQ on Ubuntu 24.04, you must download and add the Wine repository to your server. To add the Wine repository key, you can run the following commands:

# sudo mkdir -pm755 /etc/apt/keyrings
# sudo wget -O /etc/apt/keyrings/winehq-archive.key https://dl.winehq.org/wine-builds/winehq.key

Next, download the WineHQ source code for Ubuntu 24.04 with the command below:

sudo wget -NP /etc/apt/sources.list.d/ https://dl.winehq.org/wine-builds/ubuntu/dists/noble/winehq-noble.sources

Now run the system update to apply the repositories:

sudo apt updateStep 3 – Install WineHQ on Ubuntu 24.04

At this point, you can easily use one of the following branches to install Wine on Ubuntu 24.04:

1.WineHQ Stable branch:

sudo apt install –install-recommends winehq-stable

2.WineHQ Development branch:

sudo apt install –install-recommends winehq-devel

3.WineHQ Staging branch:

sudo apt install –install-recommends winehq-staging

Note: It is recommended to use the stable branch. Once your installation is completed, you can verify it by checking its version:

wine –versionOutput
wine-9.11

Note: The latest Wine development release is available now, you can read more on Wine 9.12 Development Release.

Step 4 – Configure WineHQ on Ubuntu 24.04

At this point, you have learned to install WineHQ on Ubuntu 24.04. Now you must configure Wine on your server. To do this, run the command below with a regular user:

winecfg

Wait until your Wine configuration is updated. Then, you will be asked to set up the Wine Mono installer. Click on the Install button.

It will automatically begin downloading and installing Mono and related components. Next, you will see the following screen. From there you can adjust your desired settings and continue. When it is completed, you will be able to run Windows applications in Ubuntu 24.04.

Step 5 – Uninstall Wine From Ubuntu 24.04 (Optional)

If you no longer want to use Wine, you can easily remove it from your server. To do this run the following command:

sudo apt autoremove –install-recommends winehq-stable –purge

Note: If you use Wine Development or Wine Staging, replace the winehq-stable with either winehq-devel or with winehq-staging.

For complete removal, delete the repository file:

sudo rm /etc/apt/sources.list.d/winehq*

If you have removed the WineHQ repository, it is recommended to remove the GPG key:

sudo rm /usr/share/keyrings/winehq*

That’s it, you are done. For more information, you can check the official docs page.

Conclusion

With WineHQ on Linux, you can easily run your desired Windows applications on your server. At this point, you have learned to Install WineHQ on Ubuntu 24.04 and configure it. After that, you can easily download and run Windows apps on your Ubuntu server. Hope you enjoy it.

Also, you may like to read the following articles:

WineHQ LTS Setup on Fedora Linux 39

How To Install WineHQ on AlmaLinux 9

Install the Latest WineHQ on Linux Mint 21